To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsIt is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.18-21 seconds in a Zahn #2 cup. 4 hours at 70°F. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic. Refer to the product Technical Data Sheet for complete directions for use.Nason Finishes recommends using a ratio of 8:1/2:4, or 8 parts of Nason base coat to 1/2-part base coat activator to 4 parts base coat reducer. Failure to mix the paint properly can clog your spray gun. If you’re using aerosol cans, the paint should be properly mixed in the can for you, so skip this step. What is the mixing ratio for Nason paint?Scjarena Discussion starter · Jan 8, 2018. I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some ...Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryDetailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Item#: NAS 400-01 01. Ful-Thane® 400-01 Factory Packaged Black provides outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. To 1 gallon of Ful-Thane® 2K Urethane, add 1 pint of 483-15™ Catalyst. Reduce with 1 quart Ful-Base® 441 ...Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)The perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.Application. Solid Colors: Add 1 part of RTS Ful-Thane 2K Urethane Single Stage (NIB) or Ful-Cryl 2K Acrylic Single Stage (NID) color to 1 part RTS VS4500 2K Urethane Integrated Clear during the last and final coat of the single-stage color. Effect Colors:Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.I sprayed over sanded 2K primer. Before I sprayed I wiped the panel with 70% rubbing alcohol. The fisheyes/solvent pop didn't show up until an hour or two after the last coat. I sanded down the panel with 220 and some of the craters are fairly deep but non of them go to the primer. Could it be oil in the air section of the gun?Parts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Item#: NAS 400-01 01. Ful-Thane® 400-01 Factory Packaged Black provides outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. To 1 gallon of Ful-Thane® 2K Urethane, add 1 pint of 483-15™ Catalyst. Reduce with 1 quart Ful-Base® 441 ...Single Stage Topcoat ; Thinner ; ... FUL-THANE URETHANE SS BINDER "IS" 2.8 Gallon. ... SELECTSEAL 2K URETHANE SEALER - BLACK Gallon. Item #: 422-52 01.Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages. Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...I sprayed over sanded 2K primer. Before I sprayed I wiped the panel with 70% rubbing alcohol. The fisheyes/solvent pop didn't show up until an hour or two after the last coat. I sanded down the panel with 220 and some of the craters are fairly deep but non of them go to the primer. Could it be oil in the air section of the gun?If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...Search Nason Search Nason. Safety Data Sheets. Print; Print page to PDF; Nason - Safety Data Sheets - English. Downloads. Type ...Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Dupont Fleet book, page by page. If you are on a PC click on any of the. images and the images will pop up. You can hit next and the whole or most of the page will turn into a gallery.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Search Nason Search Nason. Safety Data Sheets. Print; Print page to PDF; Nason - Safety Data Sheets - English. Downloads. Type ...Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Parts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationTo enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . Ful-Thane® 2K Urethane Binder (IB Quality) GENERAL DESCRIPTION A 5.0 lb/gal (600 g/l) VOC compliant, urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXINGDo not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.18-21 seconds in a Zahn #2 cup. 4 hours at 70°F. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic. Refer to the product Technical Data Sheet for complete directions for use.Re: Is Nason Ful-thane 2K urethane paint good paint? It's getting harder and harder to find good single stage paints any more that can be mixed in the old colors, let alone those that are half-way affordable, since the refinish business has totally gone base/clear.Mixing Tips/Nozzles ... Activator for Nason Ful-Thane 2K Urethane Single Stage Paint. Vendor: Mahopac Auto Paint ...MIXING COMPONENTS Ful-Thane® HS Urethane Topcoat (IG Quality) Ful-Base® 430-XX Tints Ful-Thane® HS 435-95™ Urethane Binder Ful-Thane® 483-52™ Activator Ful-Thane® 483-54™ Accelerator (Required) MIX RATIO Combine the components by volume (3:1). Mix thoroughly prior to activation. Component Volume Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galMIX RATIO Combine the components by volume (4:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane® 2K Urethane Topcoat (IS Quality) 4 Ful-Base® 483-56™ Low VOC Activator 1 Ful-Base® 441-60™ / 441-66™ / 441-68™ Reducer 2 ADDITIVES Fisheye Eliminator Add ½ to 2 oz Nason® 495-02™ Low VOC Fisheye Eliminator per ready ...A Low VOC compliant, urethane single stage topcoat designed to provide superior appearance and depth of color, with improved performance characteristics. Ful-Thane Low VOC Single Stage is easy to apply with better metallic control and enhanced cycle time. Features. Improved hardness development; Superior depth of color; Thousands of OEM colors Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryAxalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)item 3 Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit $130.00 Free shipping435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryCODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galApplication. Solid Colors: Add 1 part of RTS Ful-Thane 2K Urethane Single Stage (NIB) or Ful-Cryl 2K Acrylic Single Stage (NID) color to 1 part RTS VS4500 2K Urethane Integrated Clear during the last and final coat of the single-stage color. Effect Colors:Nason Finishes recommends using a ratio of 8:1/2:4, or 8 parts of Nason base coat to 1/2-part base coat activator to 4 parts base coat reducer. Failure to mix the paint properly can clog your spray gun. If you’re using aerosol cans, the paint should be properly mixed in the can for you, so skip this step. What is the mixing ratio for Nason paint?If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.how do you mix nason base coat properly? it state to mix 8:1/2:4, none of the mixing cups i've got have an 1/2 mark on it. the only way i can think to mix it properly is to double the amount of color and reducer in oz's to get a whole oz in activator, which ends up being way to much paint for one coat.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andFul-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...It is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...Clear Coat 2K Acrylic Urethane, SMR-1150/1102-Q 4:1 Gallon Clearcoat Medium Kit. For California, Delaware, or Maryland, order SS-132. 4.6 out of 5 stars 771A Low VOC compliant, urethane single stage topcoat designed to provide superior appearance and depth of color, with improved performance characteristics. Ful-Thane Low VOC Single Stage is easy to apply with better metallic control and enhanced cycle time. Features. Improved hardness development; Superior depth of color; Thousands of OEM colors Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.
Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for .... Klamath falls craigslist cars and trucks by owner
Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Ful-Thane® 2K Urethane Binder (IB Quality) Ful-Thane® 483-15TM 2K Urethane Activator Ful-Base® 441-20TM / 441-21TM / 441-22TM Reducer Volume 8 ADDITIVES Fisheye EliminatorSelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFERe: Is Nason Ful-thane 2K urethane paint good paint? It's getting harder and harder to find good single stage paints any more that can be mixed in the old colors, let alone those that are half-way affordable, since the refinish business has totally gone base/clear.Nason Ful-Thane IS Quality Single-Stage Topcoat. A urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Click here to visit the product catalog.we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.The perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Year old Nason Ful-Thane cut and buff. I have a car that was sprayed last September with Nason Ful-Thane single stage urethane (solid color). It has been stored inside since being painted. The paint job came out glassy smooth but I have some dirt and dust nibs in the paint. My question is what grit should I sand it with to remove the nibs.Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andMIXING COMPONENTS Ful-Thane® HS Urethane Topcoat (IG Quality) Ful-Base® 430-XX Tints Ful-Thane® HS 435-95™ Urethane Binder Ful-Thane® 483-52™ Activator Ful-Thane® 483-54™ Accelerator (Required) MIX RATIO Combine the components by volume (3:1). Mix thoroughly prior to activation. Component Volume .
